Directly factory sell 12V DC Electric vacuum glass lifter 500kg
12v battery supply vacuum lifter /Glass lifting equipment /12v battery supply
Customer Glass sheet specification is:
(941)mm L x(1800)mm W x(3-25)mm T, Max. weight less than 400kg.
(1500)mm L x(3000)mm W x(6+6,8+12)mm T, Max. weight less than 400kg.
The equipment specifications as below:
Max. carrying capacity is 600kg ( a safety factor 4.0 include)
Designed for use with a crane or other hoisting equipment. The Lifer employs vacuum to hold a load for lifting, and provides Manual rotation, 360° edgewise, with locking at each quarter point and manual tilt, 90° between upright and flat for load manipulation.
Power Supply: Battery-12V, 4A
Capacity: Battery 10Ah
Vacuum pads diameter: 30cm nominal diameter. Lipped (P300FN)
Load capacity: (rated at [-60kPa] on clean, smooth, nonporous flat surfaces
Manual rotation, 360° edgewise, with locking at each quarter point
Manual tilt, 90° between upright and flat, with automatic latching in upright position
Low vacuum warning light
On-board battery and charger
Battery energy gauge
Vacuum line filter
Vacuum reserve tank
Spring-mounted vacuum pads
Movable vacuum pad mounts
Vacuum pad extension arms
Manual valve is connected to suction cup separately and the operator can shut off individual suction cup according to the dimension of workpiece. This function is also useful for the self-check of vacuum reservoir.
The vacuum lifter uses USA GAST oilless rotary vanes vacuum pump to be the vacuum generator, the max. Vacuum degree is up to 85%, even no need to fill lubrication and cooling liquid.
The vacuum lifter is equipped with a buzzer and warning light units, in case of a power failure or vacuum leakage, an optical and an acoustic signal goes off immediately to warn the operator to do emergency operation.
The vacuum lifter is equipped with Vacuum reservoir tank helps prevent immediate vacuum loss in case of power failure and extends battery life by reducing pump cycles required to maintain vacuum. when the power is turned off in sudden, always can keep the workpiece not falling down for 5 minutes. Won’t bring about equipment damaged, etc Safe accidents.(EU CE standard for 5 minutes);
Operating Temperatures range: 32° to 104 °F(0°to 40 °)
Operating time: 8h