Delivery of 50KG box vacuum lifter
/ / Delivery of 50KG box vacuum lifter

Delivery of 50KG box vacuum lifter

50KG box vacuum lifter

Vacuum Tube Lifting Systems are ergonomic lift assist devices that can help increase your productivity while offering an economic solution to your material handling needs.

Vacuum Tube Lifting Systems are easy to use, simple to maintain and require minimal operator training.

Vacuum tube lifter suction of products exceed the rated load, lifting forbidden. (Function of equipment);


1) In case of power failure protection:
To ensure that the suction material does not fall under the condition of power failure. After power failure, the suction cup suction the products down slowly (Function of equipment);

2) Electric leakage protection:
To prevent the hurt caused by the electric leakage of vacuum system, and overall the insulation is good. (Function of equipment);

3) Electric current overload protection:
To prevent the abnormal current or the overload of damaged the vacuum lifter equipment. (Function of equipment);

4) To be considered the air tube of installing and laying is not collision the interference and necessary protection:
Air tube durable in use good, good sealing performance: Equipment when leaving the factory, after the force testing, the factory installation test, to ensure that each set of equipment are security, the qualified products. Upon completion of the installation., will be clearly marked on the equipment and steel structure with column;

5) When operation of vacuum tube lifter, to operate the equipment must be in strict accordance with the requirements of our operating manual, shall not be arbitrarily changed;

6) Safety suction
Cannot causing damage to the surface of the box body;

7) Be able to adapt to the work environment the temperature of -15℃ —-70 ℃;Each outside force that your hand should give to the control valve handle; 5,Knob B is also a balance knob, while the bags is not sucked, adjusting the knob is to adjust the balance between the system vacuum pressure and the lifting tube assembly own weight, so that the control valve handle could be suspended in appropriate height that suits the workers best to operate the lifter;
Remarks:The operator can adjust the control valve handle to the best suspended height according to own stature and the bags weight any time.

Similar Posts